ANA SAYFA HAKKIMIZDA ÜRÜNLERİMİZ İLETİŞİM 　 　       ÖLÇÜ ALETLERİ MICROMETER   Outside Micrometer     Special Purpose Micrometer    Micrometer With Dial Indicator   Groove Micrometer   Depth Micrometer   Inside Micrometer   Internal Micrometer   Three Points Inside Micrometer   Micrometer Accessory   Micrometer Head         Buradasınız: Ölçü Aletleri >> Mikrometreler >>Özel Mikrometreler Özel Mikrometreler (1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 )         BLADE MICROMETER     Code    Range   Code    Range   3232-25   0-25mm   3232-1   0-1"   3232-50   25-50mm   3232-2   1-2"   3232-75   50-75mm   3232-3   2-3"   3232-100   75-100mm   3232-4   3-4"   3232-125   100-125mm   3232-5   4-5"   3232-150   125-150mm   3232-6   5-6"   3232-175   150-175mm   3232-7   6-7"   Graduation: metric     0.01mm                        inch  0.0001" The anvil and spindle have blade tips to measure the groove diameter of shafts and keyways Blade tip: thickness x width x length=0.75x6x6.5mm(0.03X0.236x0.256''£© Non-rotating spindle, ratchet stop With zero adjusting wrench Supplied with standard rods Packed in plastic box or wooden box                       ELECTRONIC BLADE MICROMETER     Code    Code   Range   3532-25   3132-25   0-25mm/0-1"   3532-50   3132-50   25-50mm/1-2"   3532-75   3132-75   50-75mm/2-3"   3532-100   3132-100   75-100mm/3-4"   3532-125   3132-125   100-125mm/4-5"   3532-150   3132-150   125-150mm/5-6"   3132-175   3132-175   150-175mm/6-7"   Resolution: 0.001mm/0.00005" The anvil and spindle have blade tips to measure     the groove diameter of shafts and keyways Blade tip:thickness x width x length=0.75x6x6.5mm(0.030x0.236x0.256") Buttons:on/off,data set,mm/in, ABS/INC,data output SR44 battery,with one spare battery,auto power off RS232 output,3532 is supplied with data output cable Non-rotating spindle, ratchet stop With battery cover wrench Supplied with standard rods Packed in plastic box or wooden box         　  Copyright © 2011 HALÂS KESİCİ | Tüm Hakları Saklıdır.